How Are Tiny Homes Delivered and Installed?
Delivery & site

How Are Tiny Homes Delivered and Installed?

Tiny homes are usually transported to site as completed buildings, then positioned and connected to services. This guide explains delivery access, cranes, site preparation, placement, costs and what needs to happen before move-in.

7 min readDelivery & siteSep 2026

The short version.

  • Most tiny homes arrive largely complete

    Many transportable tiny homes are built off-site and delivered as a finished or near-finished building, reducing the amount of construction required on your property.

  • Access is one of the most important things to check

    Driveway width, turning room, trees, fences, slopes and overhead lines can all affect how easily a home can reach its final position.

  • A crane may be needed for difficult sites

    If a truck cannot get directly to the final location, crane placement may be possible depending on the weight of the home, lift distance and site conditions.

  • The site needs to be ready before delivery

    Foundations or supports, ground preparation, access and any required service work should be planned in advance.

One of the biggest advantages of a transportable tiny home is that much of the building work happens before it arrives on your property.

Instead of constructing the entire home on site, the finished or near-finished building is transported to you and positioned in its final location.

But moving an entire home still takes planning.

Before delivery day, you need to think about:

  • Road access
  • Property entrance
  • Driveway width
  • Turning space
  • Ground conditions
  • Final positioning
  • Crane access if required
  • Site preparation
  • Power
  • Water
  • Wastewater
  • Any applicable council requirements

The smoother the preparation, the smoother the delivery.

How is a tiny home transported?

The transport method depends on the size, weight and construction of the home.

Common methods can include:

  • Specialist transport trucks
  • Flatbed trucks
  • Truck and trailer units
  • Hiab trucks for smaller units
  • Heavy transport vehicles for larger homes

Some tiny homes are built on their own trailer chassis, while others are designed to be lifted or transported on specialised equipment.

The larger and wider the home, the more planning may be required around the route, timing and final access.

Is a tiny home delivered fully built?

Often, yes.

One of the main benefits of transportable construction is that the building can be completed to a high level before leaving the supplier.

Depending on the home, it may arrive with:

  • Kitchen installed
  • Bathroom completed
  • Flooring finished
  • Lighting installed
  • Interior painting completed
  • Cabinetry fitted
  • Appliances installed
  • Windows and doors complete

That means the main work after delivery is usually around positioning, securing and connecting the home to the site.

The exact level of completion varies between models, so always confirm what is included before buying.

What does the property need before delivery?

The site should be assessed and prepared before the transport arrives.

Depending on the home and property, preparation may include:

  • Clearing vegetation
  • Levelling the area
  • Ground preparation
  • Piles, foundations or supports
  • Drainage work
  • Creating temporary access
  • Removing or moving fences
  • Trimming trees
  • Preparing service connections

If site work is still incomplete when the cabin arrives, positioning can become difficult or impossible.

It is much easier to solve access and site-preparation issues before delivery day.

How much access does a tiny home need?

This depends on the size of the building and the type of transport being used.

When assessing access, look at the full journey from the road to the final location.

Check:

Property entrance

Is the gate or driveway wide enough?

Driveway

Is it wide enough for the transport vehicle and home?

Corners

Can a large truck make the turns required?

Turning space

Is there room for the truck to manoeuvre once it reaches the property?

Height

Are there:

  • Trees
  • Power lines
  • Roof overhangs
  • Other overhead obstacles

Ground conditions

Soft, steep or uneven ground can make access difficult for heavy vehicles.

Existing buildings

Garages, houses, fences and sheds can restrict the route.

A home may fit perfectly in the proposed location but still be impossible to drive directly into position.

What if a truck can't reach the final position?

That does not necessarily mean the site is unsuitable.

A crane may sometimes be used to lift the home from the transport vehicle into its final position.

Crane placement can be useful where:

  • The home needs to go behind an existing house
  • Access is too narrow for the delivery vehicle
  • A fence or wall blocks direct access
  • The building needs to be lifted over an obstacle
  • The final site is some distance from the driveway

However, craneage also needs planning.

Factors include:

  • Weight of the home
  • Distance of the lift
  • Height of obstacles
  • Crane access
  • Ground stability
  • Available setup space

The further the cabin needs to be lifted, the larger the crane may need to be.

This can add significantly to delivery cost, so it is worth identifying early.

How is the tiny home positioned?

Once the home reaches the site, it needs to be placed accurately onto its prepared supports or foundation system.

This may involve:

  • Reversing directly into place
  • Lifting with a crane
  • Using hydraulic equipment
  • Sliding or manoeuvring the home into its final position

The home is then typically:

  • Levelled
  • Supported
  • Secured as required
  • Checked for final position

This is why the foundations or support system need to be prepared accurately before the building arrives.

Does the site need foundations?

That depends on the home and installation method.

Some buildings may sit on:

  • Engineered piles
  • Concrete foundations
  • Timber supports
  • Steel supports
  • Another approved base system

Others may remain on their transportable chassis, depending on the building and intended use.

The foundation or support method can affect:

  • Compliance
  • Stability
  • Floor level
  • Access steps
  • Service connections
  • Future relocation

This should be decided before delivery rather than improvised once the home arrives.

How are power, water and wastewater connected?

Positioning the home is only part of the installation.

A self-contained tiny home may also need:

Power

This could involve:

  • Connection to an existing electrical supply
  • Underground cable
  • New switchboard work
  • Off-grid solar and battery systems

Electrical work should be completed by appropriately qualified tradespeople.

Water

The home may connect to:

  • Mains water
  • An existing private supply
  • Water tanks
  • Another suitable supply

Wastewater

Depending on the site, the home may connect to:

  • Council wastewater
  • An existing septic system
  • A new on-site wastewater system

Stormwater

Roof water also needs to be managed appropriately for the property.

The further the cabin sits from existing services, the more trenching and connection work may be required.

How long does installation take?

The actual physical placement of a tiny home can be relatively quick where the site is straightforward and well prepared.

However, the total setup time depends on:

  • Site access
  • Foundation system
  • Crane requirements
  • Power connection
  • Plumbing and drainage
  • Wastewater
  • Steps or decking
  • Final finishing work

A simple placement can potentially be completed very quickly.

A more complex site involving craneage, new wastewater, extensive trenching or other work will naturally take longer.

The important point is that the house itself does not need to be built from scratch once it arrives.

How much does tiny home delivery cost?

There is no single delivery price.

Transport costs vary according to:

  • Distance
  • Home dimensions
  • Weight
  • Transport vehicle required
  • Route complexity
  • Oversize transport requirements
  • Site access
  • Craneage
  • Time required on site

A relatively small home being moved a short distance to an easy-access property will usually cost less than a large home travelling a long distance and requiring specialist lifting equipment.

When comparing tiny-home prices, always establish whether:

  • Delivery is included
  • Delivery is quoted separately
  • Craneage is included
  • Site placement is included

For more on total project budgeting, see How Much Does a Tiny Home Cost in NZ?

Can tiny homes be delivered anywhere in New Zealand?

Potentially, but every route and property needs to be assessed individually.

The practical constraints are usually:

  • Road access
  • Transport dimensions
  • Property access
  • Site position
  • Ground conditions
  • Distance
  • Cost

Remote and rural properties may have plenty of room once the home is on site but still present challenges such as:

  • Narrow rural roads
  • Bridges
  • Steep driveways
  • Soft paddocks
  • Long access tracks
  • Tight gateways

Urban properties can present the opposite problem:

  • Narrow driveways
  • Nearby houses
  • Limited turning room
  • Fences
  • Overhead services

Neither is automatically easier.

What can cause problems on delivery day?

The most common issues are usually things that could have been identified beforehand.

These can include:

  • Driveway too narrow
  • Unexpected low branches
  • Power lines
  • Soft or wet ground
  • Incomplete foundations
  • Fences still in the way
  • Not enough turning room
  • Incorrect site measurements
  • Services installed in the wrong position

A site assessment and clear delivery plan can help reduce the risk of last-minute problems.

Can a tiny home be moved again later?

Many transportable homes can potentially be relocated in the future.

How easy that is depends on:

  • How the home was constructed
  • Its size and weight
  • The foundation system
  • Service connections
  • Decks and other additions
  • Access to the site
  • The next property's access

If future relocation matters to you, it is worth discussing that before the first installation.

Choices made around foundations, services and decking can either make future relocation easier or much more complicated.

What should you check before delivery?

Before confirming a delivery date, work through this checklist.

  • Final cabin position confirmed
  • Site measured
  • Boundary and placement requirements checked
  • Foundations or supports completed
  • Driveway and gate access confirmed
  • Trees and vegetation cleared if required
  • Overhead obstacles checked
  • Ground conditions suitable
  • Crane booked if required
  • Power connection planned
  • Water connection planned
  • Wastewater solution confirmed
  • Stormwater solution confirmed
  • Relevant approvals or exemption requirements completed
  • Transport company has accurate site information

If those pieces are in place, the actual delivery becomes much more straightforward.

The best delivery starts before you buy

One of the easiest mistakes to make is choosing the home first and worrying about delivery later.

A better approach is to consider the home and site together.

Before making the final purchase decision, ask:

  1. Will it fit on the property?
  2. Can it physically get there?
  3. Can it be positioned where I want it?
  4. Is the site ready?
  5. How will the services connect?
  6. What will transport and setup cost?

Once those questions are answered, you can buy with much more confidence.

And because Tiny Home Base carries completed cabins on site, you can inspect the actual building before arranging the logistics of moving it to yours.

From our yard to your propertyGood site preparation makes delivery day significantly easier.

In real life

From our yard to your property

Choose the cabin first, then plan the transport, site access and positioning around the actual home and property.

Questions about this topic.

How are tiny homes delivered in NZ?


Tiny homes are generally transported by specialist truck or trailer, depending on their size and construction. Once on site, they are positioned directly by the transport vehicle or lifted into place using equipment such as a crane.

Do tiny homes arrive fully built?

Many transportable tiny homes arrive largely or fully completed, including kitchens, bathrooms, flooring and internal finishes. The exact inclusions depend on the model.

Do I need a crane to install a tiny home?

Not always. If the delivery vehicle can access the final position, a crane may not be required. Craneage is more likely where access is restricted or the home needs to be lifted over obstacles.

How much does it cost to deliver a tiny home?

Delivery cost depends on distance, cabin size, weight, route, access and whether specialist equipment such as a crane is required. Ask for a site-specific transport estimate rather than assuming a standard delivery price.

What site preparation is needed before a tiny home arrives?

Depending on the home, preparation may include clearing and levelling the site, foundations or supports, drainage, delivery access and planning service connections.

Can a tiny home be delivered to a difficult site?

Sometimes. Restricted access may be managed through crane placement or other specialist equipment, but feasibility and cost should be assessed before purchasing

When are utilities connected?

Power, water, wastewater and other services are generally connected after the home has been positioned, although the site-side infrastructure should be prepared before delivery where possible

Can a tiny home be moved again?

Many transportable homes can potentially be moved later. The ease and cost of relocation depend on the building, foundation system, services, site access and any additions made after installation.